English
EspañolDrift Eliminator
| Type | TEP-SP 130 | |
| Material | Polypropylen (PP), UV-resistant | |
| Drift loss (*) | % | 0,002 |
| Weight | Kg/m2 | ~ 4 |
| Max. air velocity | m/s | 4,5 |
| Max. spacing of supports | mm | 800 |
| Dimensions: | ||
| Length | mm | 0 - 2,400 |
| Width | mm | 0 - 600 |
| Height | ||
| Service temperature | ºC | -10/+80 |
* Based on the CTI ATC-140 test method (Isokinetic Drift Test Code). These limits are guidelines only. The performance of the drift eliminator is indicated by the ratio drift loss/water flow rate. The efficiency of droplet separation depends on constant air velocity and an absolutely tight assembly of drift eliminator elements.
Other properties of SANIPACKING® Drift Eliminator Elements
• Optimal droplet capture.
• High temperature (up to 80°C) and UV-resistant.
• No deformation under direct sunlight.
• No brittleness and no sharp edges.
German Lab Test 
Download Lab Test in PDF
Download Lab Test in PDFDr. J. Balfanz - Dr. M. Lohmeyer - GbR
Biotechnologie, Forschung, Analytik
SANIPACKING® Cooling Tower Fills